Complete step by step manual bed leveling process

Monoprice Mini Print settings
Layer Height: .131
First Layer: .175

Layer Height: .175
First Layer: .218

Layer Height: .218
First Layer: .262

Speed Settings, Good starting place
Print: 40
Travel: 70
First Layer: 30
Outer Perimeter: 30
Inner Perimeter: 35
Infill: 45

Aluminum sheet used for the Monoprice Mini and My Prusa i3 Clone above the original heated bed for a nice flat printing surface
https://www.amazon.com/gp/product/B00HRHB5XA/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00HRHB5XA&linkCode=as2&tag=amakerslife-20&linkId=03ffdf39d4c78b6f441ed7897262f8c1

My Thingiverse Designs
https://www.thingiverse.com/a_makers_life/designs

My Tinkercad Designs
https://www.tinkercad.com/users/0RxhGZwzXXM-davidnuhq9
(Working on making them all public, they are private by default)